Maintenance Tips for Concrete Basement Floors


Concrete is among the most common flooring options for basements because of its incredible durability. But, even though it’s an extremely tough material, it’s still not immune to damage, like cracks, dents, and tiny holes on its surface. To prevent that from happening, you need to take care of it by following the maintenance tips listed in this article.

Tip #1: Clean It Regularly

The first way to keep your concrete floor in tip-top condition is to clean it regularly. If your basement doesn’t receive a lot of traffic, occasional dry mopping and wiping thedirt and grime off of the surface will suffice. Otherwise, you should follow this step-by-step guide:

  1. Mop the surface with water and PH-neutral cleaner.
  2. Focus on the areas that receive a lot of foot traffic because those are exposed to more dirt and debris that cause dents and scratches.
  3. Let the whole floor dry for a few minutes.
  4. Apply a special cleaning conditioner, which acts as a protective and dirt-resistant film on the surface.
  5. Repeat these steps at least once a week.

Tip #2: Wax It Once in a While

Waxing concrete keeps its surface shiny andhelps in avoiding scratches and dents caused by tiny debris. This also prevents your floor from getting exposed to stains, grease, and dirt that can cause small abrasions. Here are the steps:

  1. Buy wax products that don’t contain too many active chemicals. These substances may be toxic and harmful to your health.
  2. Sweep the floor to get rid of the dirt.
  3. Mop the floor with clean water and then let it dry for a few minutes to ensure that the wax product will stick to the concrete.
  4. Place an ample amount of the wax product on a dry piece of cloth.
  5. Use the cloth to wipe the surface in a horizontal motion.
  6. Once the whole floor area is covered, wait for a few minutes before doing the same waxing procedure a second time.

Tip #3: Apply a Protective Sealant on Its Surface

You can also apply a protective sealant on your concrete floor. You can purchase this product from a store or make your own homemade version by following these steps:

  1. Prepare equal amounts of linseed oil and thinner. Ready a set of paint rollers and a tray, as well.
  2. Boil the linseed oil and let it cool down for a few minutes.
  3. In a container, pour the linseed oil and thinner. Gently stir the solution and ensure that bubbles aren’t forming.
  4. Pour an ample amount of the mixture into the tray. Apply it on the floor with the roller. Use light vertical strokes.
  5. Once the whole floor area is covered, wait for about 24 to 48 hours before letting anyone step on it again.

This homemade concrete sealer works like commercial products. The solutionacts as a protective layer on the surface, preventing it from getting tiny dents and scratches.

Leave a Reply

Your email address will not be published. Required fields are marked *